I am looking for a 60GB LIKE NEW PS3 w/all Accessories.

I have for trade;

The car and accessories in total cost over $800.
I used this drift car a total of 4 times, I had it inspected by the owner of my nearby hobby shop to make
sure everything was correct. I bought this Drift Car to use at our nearby track but the track is no longer
being built.



This auction includes;
The Car Built, Novak Charger, Novak Rooster, Futaba Remote Control, x2 Battery Packs, and tons of extras (listed below).
Good Luck To all Bidders!

YOKOMO Car Information
(DOES NOT INCLUDE CAR BODY)

This is the 1/10 scale, electric powered, radio controlled, 4 wheel drive

Yokomo MR-4TC SD CM chassis with an APEX FD3S Mazda RX-7. Body and decal sheet that will
replicate the full scale drift car. This is one of the Yokomo Drift Package models. Drift
racing is a controlled, corner sliding style of racing that has been gaining popularity in
full scale. Now Yokomo brings this racing to modelers.

Chassis:
High strength molded composite chassis
Drive: Full time 4 wheel drive (shaft driven)
Ball Bearings Location: Gear boxes and bushings on wheel shafts

Bushings:
Eight 6x10mm metal support the front and rear axles

Shocks:
Plastic bodied, oil-filled, coil-over

Gearbox:
Sealed front and rear each gearbox uses two 8x14mm bearings and two 5x10mm bearings

Differentials:
LSD style ball differentials in the front & rear. Each differential uses two 5x8 metal bushings and two 10x15mm bearings

Transmission:
Single speed

Tires:
Hard rubber slick with 2 special grooves per tire for the installation of plastic tire rings that help the car slide

Wheels:
1" (26mm) wide, chrome and yellow (for rear wheels) and chrome and red (for front wheels)

Bumpers:
Front foam bumper

Suspension:
Fully adjustable double-wishbone

Caster:
Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis

Camber:
Adjustable, camber refers to the angle of the tops of the tires from vertical when when viewed from front or behind vehicle

Steering:
Bell-crank type with four 4x8 plastic bushings

Servo Saver:
Included with adapters for Futaba, Hitec, JR, KO, and Airtronics servos
Front universal drive shafts
Scale accessory parts including chrome muffler, wipers & mirrors
Model will take 6-cell stick or side-by-side battery packs
DPFC3S rolling chassis with oil-filled shocks, clear body, plastic wings, tires, chrome wheels, 48 pitch 70 tooth spur gear, 48 pitch
30 tooth pinion gear, foam bumper, decal sheet, and building instructions manual.


Futaba Remote Control
This replaces the 2PC Magnum Sport radio. Rotary steering and throttle trims
Two LED battery condition indicators. Lightweight and ergonomic design reduces fatigue and improves control. Red rubber grip at the
fingertips. Servo reversing switches hidden behind smoked panel.

Novak Ionic Charger
Designed with the same technology developed for the Millennium Pro Two user selectable microprocessor controlled modes: NiCd Linear;
Novak NiMH2 mode for safe charging of all NiMH cells Straight forward user interface with easy-to-see LEDs indicating Charge mode settings
and charge status Automated Battery Analysis/Conditioning for trouble free charging Fully protected fuse protection for reverse input voltage,
output reverse voltage/short circuit and thermal overload Novak's own Triple Detection NiMH2 Charge algorithm (helps eliminate false peaking)-the
best charge available for NiMH batteries Detachable/replaceable input, output and AC power wires Accepts 100-240V AC for worldwide usage,
built-in Power Supply is CE and UL approved

Built-in cooling fan
Large alligator clips for car battery connection
120 day limited warranty

One Ionic-D AC/DC charger with power and output wires, two alligator clips, non-skid rubber feet and operating instructions

Novak Rooster 12T
Handles brushed motors 12 turns and above using 6-cell NiMH battery
Input voltage of 4-7 NiCd/NiMH (1.2v/cell) or 2 LiPo cells
LiPo cutoff protection-if voltage drops to critical level speed
control shuts off leaving full control of steering servo
Heavy-duty 6V/1.5A BEC (Battery Eliminator Circuit) is ideal
for running modified motors
Water resistant case
Four driving profiles: FWD/BRK/REV (default)
Direct solder wiring tabs
User replaceable input harness
One-touch set-up
Smart Braking II brake system
Radio Priority and Polar Drive circuitry
Novak Rooster 12 Turn Speed Control with Tamiya type battery plug, 14AWG power wires and instruction sheet.

EXTRAS:
Extra Tubing
Car Glue
Screw Tight
2 Batteries
Soldering Connectors
Solder
Extra Parts
Car Tools

Thanks.

Can show Ebay Score for reference that I am not a scammer.

PS. You can contact me at 2152623989 (Chris) or MyFistUrFace@Perditionguild.com